Epson Building Reality

epson-floor

CASE STUDY

Project: Building Reality

Scope: 6 x Epson EB-1505UNL 12,000 ANSI lumen projectors

Integrator: Vision One

epson bee

 LIFESIZE TO REALITY

It was mid 2018 and Melbourne entrepreneur Jason Jaap was looking to expand his business portfolio. He’d seen the immersive installation at Lifesize Plans in Sydney and was captivated by the concept of accurately projecting life-size building floor plans onto the ground.

 

Here, architects, designers and consultants can walk their clients through a realistic 1:1 scale projection of their prospective layout, making any design or outline changes before committing to bricks and mortar. Jason contacted the creative technologies and design team at Vision One to create a similar experience in Melbourne, branding it Building Reality.

 

 

epson-floor-2

 THE MAIN ATTRACTION

After detailed consultation between Vision One and Epson’s technical experts, 6 x Epson EB-L1505UNL 12,000 ANSI lumen laser projectors were selected for installation in a reinforced ceiling grid, carefully spaced 12.3m and 4.7m apart. This matrix allowed for a full image size of 26m wide x 18m deep, slightly larger than a basketball court.

These 12,000-lumen, WUXGA LCD laser projectors feature 4K enhancement and are connected back to the rack over Cat6 cabling, using long-distance HDBaseT transmitters and receivers from Clean Digital. The Cat6 cable carries both HDMI and RS232 signals for display output and system control.

epson-floor-3

 DETAILED SETUP

Before any content was shown, the meticulous process of projector alignment was undertaken. Once each projector was properly positioned, Epson’s on-board individual Curve and Point Correction was used for point correction. This operation fine-tuned the image shape using definitive points on a grid. Meanwhile, curve projection was used to adjust and correct the shape of each image projecting against irregular, curved or spherical surfaces in the flooring.

This sequence was performed on each of the six projectors, ensuring that an even and aligned grid could be achieved between each designated blend. The projector’s lens shift and zoom functions were also used here, allowing for more precise pixel-to-pixel adjustments.

Back at the rack, some lateral thinking from Vision One saw 2 x DataPath Fx4 video wall controllers used to configure the blend, content distribution and overlap regions of the projectors.

Control of the whole system is achieved with the use of an HP Pavilion All-In-One Z8G53AA Intel i7 27H Windows 10 PC and integrated touchscreen.

 

 

EPSON 4

 VIRTUAL HOUSE TOUR

Given that many people struggle with conceptualising a three-dimensional space from a two-dimensional drawing, the potential benefits of conducting a virtual walk thru and alter your floorplan before a sod is even turned, are enormous. What Vision One and Building Reality have done here is create a seamless and well-constructed facility that allows just that.