The Evolution series represents our latest and greatest approach to subwoofer design. Born of the same engineering expertise that delivered our popular Cub Sub, it delivers tight, punchy bass and is the perfect complement to our Episode® Speakers andSoundbars. An efficient DRiVE™ digital amplifier is combined with LFEQ Technology – Episode’s exclusive dual equalization circuitry – to deliver extended bass response with more output than anything in its class. Add in a piano gloss finish and flush-mounted grille, and it’s obvious this subwoofer delivers premium performance you can see and hear.
At the heart of this subwoofer is a highly efficient DRiVE™ Class-D amplifier. This digital technology produces 200 RMS (400W dynamic) of clean, tight bass and is up to 60% more efficient than conventional analog designs. In standby mode, the subwoofer consumes less than 0.5 watts, making it one of the “greenest” solutions available.
Woven Fiberglass Driver
Engineered from top-shelf components, this sub features a custom 10" driver with a woven fiberglass cone, Nomex spider and high-temperature voice coil. This rigid, lightweight design produces tight, low distortion that’s simply unmatched.
Small, Sealed, Sophisticated
This subwoofer is the perfect solution for installs where you need deep bass and accurate sound, but don’t have a lot of space to accomplish it. Its sealed cabinet provides impeccable responsiveness and highly accurate sound – all from a form factor that’s up to 20% smaller than comparable subs, so it can fit in cabinets when the install requires. A glossy polyurethane finish and flush-mounted grille gives a premium look and feel customers are sure to appreciate.
An accordion-like ribbed surround allows for linear cone movement, so you get low distortion even at high volume levels.
High/Low Level Inputs & Outputs
This subwoofer has the versatility to get the job done in all kinds of applications! For home theater installs, simply hook your receiver's subwoofer output to the LFE input – and you're good to go. And if your receiver only has speaker outputs, no problem! Just connect to the high-level inputs and then on to the speakers.
Signal Sensing Power-On
This Episode® subwoofer features a dedicated on/off switch, as well as a power-saving standby mode that automatically turns it off after 15 minutes of inactivity. However, as soon as an audio signal is detected, it roars to life – adding instant boom to any room. Now if you could just get the kids to turn off the lights when they leave…
Crossover & Phase Controls
For an unbelievable music and movie experience, the subwoofer can be tuned to match the speakers and room. A rear-mounted rotary crossover adjustment and variable rotary dial enable you to optimize the system for the ultimate performance – providing more degrees of freedom in your install.
|Woofer:||10" Woven Fiberglass Cone, High Temp 1.5" Voice Coil|
|Amplifier:||200 watts RMS @ 0.2% THD|
|Signal to Noise Ratio:||90 dB A-weighted|
|Input Power:||100-120/220-240 VAC, ~50/60 Hz, 2.5A|
|Low frequency (-3db):||28Hz|
|Low frequency (-6db):||24Hz|
|Low frequency (-10db):||20Hz|
|High frequency (-3db):||200Hz|
|Crossover Control:||50 Hz - 200 Hz|
|Magnet Weight:||54.0 oz|
|Dimensions(W x H x D):||12.5" x 13.1" x 13.7"|
|Connectors:||RCA Inputs & Gold Plated 5-Way Binding Posts|
|Adjustments:||Volume, Crossover Frequency, Phase Control, Auto/On/Off|
|Optional Accessories||ES-SUB-WIRELESS, Cables|